% !TeX program = pdflatex
\documentclass[paper=a4, pagesize, DIV=20,
english,
headings=small,11pt,
titlepage=false,
numbers=noendperiod
]{scrreprt}
\addtokomafont{sectioning}{\rmfamily}
\usepackage[T1]{fontenc}
\usepackage[charter]{mathdesign}
\usepackage{luximono}
\usepackage[scaled]{helvet}
\usepackage[dvipsnames]{xcolor}
\usepackage{doc}[=v2] % to achieve max backward compatibility
\usepackage{shortvrb,xspace}
\makeatletter
% to be fixed at some point...
\AtBeginDocument{% prepare for doc v3
\let\PrintDescribeMacro\@gobble
\let \PrintDescribeEnv\@gobble
\let \PrintMacroName\@gobble
\let \PrintEnvName\@gobble
}
\makeatother
\CodelineNumbered
\usepackage{listings}
\usepackage{amsmath, amsthm}
\usepackage{enumitem}
\setlist[description, 1]{labelindent=2em, leftmargin=2em, rightmargin=2em, labelwidth=!}
\usepackage{tikz}
\usetikzlibrary{tikzmark}
\usepackage{nameref}
\usepackage{hyperref}
\hypersetup{
colorlinks,
linkcolor=RoyalBlue,
urlcolor=RoyalBlue,
linktoc=all
}
\usepackage{cleveref}[2010/05/01]
\usepackage{thmtools, thm-restate}
\usepackage[unq]{unique}
\providecommand\pkg[1]{\textsf{#1}}
\providecommand\Thmtools{\pkg{Thmtools}\xspace}
\providecommand\thmtools{\pkg{thmtools}\xspace}
\providecommand\oarg[1]{\texttt{[}\textit{#1}\texttt{]}}
\providecommand\marg[1]{\texttt{\{}\textit{#1}\texttt{\}}}
\providecommand\clap{\makebox[0pt][c]}
\newcommand\key[2][\keydefaultcontext]{%
% todo: create an index from this...
\paragraph*{\texttt{#2}}
}
\newcommand\change[2]{%
(\textbf{#1: \textsf{#2}})%
}
\lstloadlanguages{[LaTeX]TeX}
\lstset{language=[LaTeX]TeX,basicstyle=\small\ttfamily,keywordstyle=\mdseries,aboveskip=0pt}
\lstnewenvironment{preamble}[1][]{%
\lstset{backgroundcolor=\color{Purple!15},#1}%
}{%
}
\lstnewenvironment{body}[1][]{%
\lstset{backgroundcolor=\color{Yellow!30},#1}%
}{%
}
\newenvironment{source}{%
\par\noindent\strut\minipage[t]{0.61\linewidth}
}{%
\endminipage
}
\newenvironment{result}{%
\hfill\minipage[t]{0.37\linewidth}
\vspace{1pt}%
}{%
\endminipage\strut\par
\vspace{3pt}%
}
%\MakeShortVerb{\|}
\lstMakeShortInline{|}
\declaretheorem{theorem}
\declaretheorem[numberwithin=section]{theoremS}
\declaretheorem[name=\"Ubung]{exercise}
\declaretheorem[sibling=theorem]{lemma}
\declaretheorem[numbered=no,
name=Euclid's Prime Theorem]{euclid}
\declaretheorem[numbered=unless unique]{singleton}
\declaretheorem[numbered=unless unique]{couple}
\declaretheorem[style=remark]{remark}
\declaretheorem{Theorem}
\declaretheorem[shaded={bgcolor=Lavender,
textwidth=12em}]{BoxI}
\declaretheorem[shaded={rulecolor=Lavender,
rulewidth=2pt, bgcolor={rgb}{1,1,1}}]{BoxII}
\declaretheorem[thmbox=L]{boxtheorem L}
\declaretheorem[thmbox=M]{boxtheorem M}
\declaretheorem[thmbox=S]{boxtheorem S}
\declaretheoremstyle[
spaceabove=6pt, spacebelow=6pt,
headfont=\normalfont\bfseries,
notefont=\mdseries, notebraces={(}{)},
bodyfont=\normalfont,
postheadspace=1em,
qed=\qedsymbol
]{mystyle}
\declaretheorem[style=mystyle
]{styledtheorem}
\declaretheorem[name=Theorem, refname={theorem,theorems},
Refname={Theorem,Theorems}]{callmeal}
% make the full toc entry clickable while only the page number part is colored
% based on my own TeX-SX answer https://tex.stackexchange.com/a/555695
\usepackage{xpatch}
\makeatletter
\xpatchcmd\contentsline
{%
\csname l@#1\endcsname{%
\Hy@toclinkstart{#2}\Hy@toclinkend
}{%
\Hy@toclinkstart{#3}\Hy@toclinkend
}%
}
{%
\csname l@#1\endcsname{%
\begingroup
\def\@linkcolor{black}%
\Hy@toclinkstart{#2}\Hy@toclinkend
\endgroup
}{%
\Hy@toclinkstart{#3}\Hy@toclinkend
}%
}
{}{\PatchFailed}
% set default input path
\def\input@path{{../source/}}
\makeatother
\input{VERSION.tex}
\title{\Thmtools Users' Guide}
\author{2008–2014 Dr. Ulrich M. Schwarz -- ulmi@absatzen.de\thanks{%
who would like to thank the users for testing, encouragement, feature requests, and
bug reports. In particular, Denis Bitouz\'e prompted further improvement
when \thmtools got stuck in a ``good enough for me'' slump.}
\and
\rule{20pt}{0pt}2020-- Yukai Chou\rule{20pt}{0pt} % force newline
}
\date{\VERSION\\{\small\url{https://github.com/muzimuzhi/thmtools}}}
\begin{document}
\maketitle
\section*{\abstractname}
The \thmtools bundle is a collection of packages that is designed to
provide an easier interface to theorems, and to facilitate some more
advanced tasks.
If you are a first-time user and you don't think your requirements are out
of the ordinary, browse the examples in \autoref{cha:impatient}. If you're
here because the other packages you've tried so far just can't do what you
want, take inspiration from \autoref{cha:extravagant}. If you're a repeat
customer, you're most likely to be interested in the refence section in
\autoref{cha:reference}.
\begin{multicols}{2}[\section*{\contentsname}]
\makeatletter
\let\chapter\@gobbletwo
\tableofcontents
\end{multicols}
\clearpage
\chapter{\Thmtools for the impatient}\label{cha:impatient}
\section*{How to use this document}
This guide consists mostly of examples and their output, sometimes with a
few additional remarks. Since theorems are defined in the preamble and
used in the document, the snippets are two-fold:
\begin{source}
\begin{preamble}[gobble=4]
% Preamble code looks like this.
\usepackage{amsthm}
\usepackage{thmtools}
\declaretheorem{theorem}
\end{preamble}
\begin{body}[gobble=4]
% Document code looks like this.
\begin{theorem}[Euclid]
\label{thm:euclid}%
For every prime $p$, there is a prime $p'>p$.
In particular, the list of primes,
\begin{equation}\label{eq:1}
2,3,5,7,\dots
\end{equation}
is infinite.
\end{theorem}
\end{body}
\end{source}
\begin{result}
The result looks like this:
% \begin{theorem}[Euclid]
% For every prime $p$, there is a prime $p'>p$.
% In particular, there are infinitely many primes.
% \end{theorem}
\begin{restatable}[Euclid]{theorem}{firsteuclid}
\label{thm:euclid}%
For every prime $p$, there is a prime $p'>p$.
In particular, the list of primes,
\begin{equation}\label{eq:1}
2,3,5,7,\dots
\end{equation}
is infinite.
\end{restatable}
\end{result}
Note that in all cases, you will need a \emph{backend} to provide the
command |\newtheorem| with the usual behaviour. The \LaTeX\
kernel has a built-in backend which cannot do very much; the most common
backends these days are the \pkg{amsthm} and \pkg{ntheorem} packages.
Throughout this document, we'll use \pkg{amsthm}, and some of the features
won't work with \pkg{ntheorem}.
\section{Elementary definitions}
As you have seen above, the new command to define theorems is
|\declaretheorem|, which in its most basic form just takes the
name of the environment. All other options can be set through a key-val
interface:
\begin{source}
\begin{preamble}[gobble=4]
\usepackage{amsthm}
\usepackage{thmtools}
\declaretheorem[numberwithin=section]{theoremS}
\end{preamble}
\begin{body}[gobble=4]
\begin{theoremS}[Euclid]
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{theoremS}
\end{body}
\end{source}
\begin{result}
\begin{restatable}[Euclid]{theoremS}{euclidii}
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{restatable}
\end{result}
Instead of |numberwithin=|, you can also use |parent=| and
|within=|. They're all the same, use the one you find easiest to
remember.
Note the example above looks somewhat bad: sometimes, the name of the environment,
with the first
letter uppercased, is not a good choice for the theorem's title.
\begin{source}
\begin{preamble}[gobble=4]
\usepackage{amsthm}
\usepackage{thmtools}
\declaretheorem[name=\"Ubung]{exercise}
\end{preamble}
\begin{body}[gobble=4]
\begin{exercise}
Prove Euclid's Theorem.
\end{exercise}
\end{body}
\end{source}
\begin{result}
\begin{exercise}
Prove Euclid's Theorem.
\end{exercise}
\end{result}
To save you from having to look up the name of the key every time, you can
also use |title=| and |heading=| instead of |name=|; they do exactly
the same and hopefully one of these will be easy to remember for you.
Of course, you do not have to follow the abominal practice of numbering
theorems, lemmas, etc., separately:
\begin{source}
\begin{preamble}[gobble=4]
\usepackage{amsthm}
\usepackage{thmtools}
\declaretheorem[sibling=theorem]{lemma}
\end{preamble}
\begin{body}[gobble=4]
\begin{lemma}
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{lemma}
\end{body}
\end{source}
\begin{result}
\begin{lemma}
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{lemma}
\end{result}
Again, instead of |sibling=|, you can also use |numberlike=| and
|sharecounter=|.
Some theorems have a fixed name and are not supposed to get a number.
To this end, \pkg{amsthm} provides |\newtheorem*|, which is
accessible through \thmtools:
\begin{source}
\begin{preamble}[gobble=4]
\usepackage{amsthm}
\usepackage{thmtools}
\declaretheorem[numbered=no,
name=Euclid's Prime Theorem]{euclid}
\end{preamble}
\begin{body}[gobble=4]
\begin{euclid}
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{euclid}
\end{body}
\end{source}
\begin{result}
\begin{euclid}
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{euclid}
\end{result}
As a somewhat odd frill, you can turn off the number if there's only one
instance of the kind in the document. This might happen when you split and
join your papers into short conference versions and longer journal papers
and tech reports. Note that this doesn't combine well with the sibling
key: how do you count like somebody who suddenly doesn't count anymore?
Also, it takes an extra \LaTeX\ run to settle.
\begin{source}
\begin{preamble}[gobble=4]
\usepackage{amsthm}
\usepackage{thmtools}
\usepackage[unq]{unique}
\declaretheorem[numbered=unless unique]{singleton}
\declaretheorem[numbered=unless unique]{couple}
\end{preamble}
\begin{body}[gobble=4]
\begin{couple}
Marc \& Anne
\end{couple}
\begin{singleton}
Me.
\end{singleton}
\begin{couple}
Buck \& Britta
\end{couple}
\end{body}
\end{source}
\begin{result}
\begin{couple}
Marc \& Anne
\end{couple}
\begin{singleton}
Me.
\end{singleton}
\begin{couple}
Buck \& Britta
\end{couple}
\end{result}
\change{New}{2020/08/01} Actually, the mandatory argument of |\declaretheorem| accepts a list of environment names, so you can define similar theorems at once. Moreover, similar to |\setmainfont| from \pkg{fontspec} package, the key-value interface can be used both before and after the mandatory argument.
\begin{source}
\begin{preamble}[gobble=4]
\declaretheorem[numberwithin=section]
{theorem, definition}
\declaretheorem{lemma, proposition, corollary}[
style=plain,
numberwithin=theorem
]
\end{preamble}
\end{source}
\clearpage
\section{Frilly references}
In case you didn't know, you should: \pkg{hyperref}, \pkg{nameref} and
\pkg{cleveref} offer ways of ``automagically'' knowing that
|\label{foo}| was inside a theorem, so that a reference adds the
string ``Theorem''. This is all done for you, but there's one catch: you
have to tell \thmtools\ what the name to add is. By default, it will use
the title of the theorem, in particular, it will be uppercased.
(This happens to match the guidelines of all
publishers I have encountered.) But there is an alternate spelling
available, denoted by a capital letter, and in any case, if you use
\pkg{cleveref}, you should give two values separated by a comma, because
it will generate plural forms if you reference many theorems in one
|\cite|.
\begin{source}
\begin{preamble}[gobble=6]
\usepackage{amsthm, thmtools}
\usepackage{
hyperref,%\autoref
% n.b. \Autoref is defined by thmtools
cleveref,% \cref
% n.b. cleveref after! hyperref
}
\declaretheorem[name=Theorem,
refname={theorem,theorems},
Refname={Theorem,Theorems}]{callmeal}
\end{preamble}
\begin{body}[gobble=6]
\begin{callmeal}[Simon]\label{simon}
One
\end{callmeal}
\begin{callmeal}\label{garfunkel}
and another, and together,
\autoref{simon}, ``\nameref{simon}'',
and \cref{garfunkel} are referred
to as \cref{simon,garfunkel}.
\Cref{simon,garfunkel}, if you are at
the beginning of a sentence.
\end{callmeal}
\end{body}
\end{source}
\begin{result}
\begin{callmeal}[Simon]\label{simon}
One
\end{callmeal}
\begin{callmeal}\label{garfunkel}
and another, and together, \autoref{simon}, ``\nameref{simon}'',
and \cref{garfunkel} are referred to as \cref{simon,garfunkel}.
\Cref{simon,garfunkel}, if you are at the beginning of a sentence.
\end{callmeal}
\end{result}
\section{Styling theorems}
\label{sec:styling}
The major backends provide a command |\theoremstyle| to switch
between looks of theorems. This is handled as follows:
\begin{source}
\begin{preamble}[gobble=4]
\usepackage{amsthm}
\usepackage{thmtools}
\declaretheorem[style=remark]{remark}
\declaretheorem{Theorem}
\end{preamble}
\begin{body}[gobble=4]
\begin{Theorem}
Note how it still retains the default style,
`plain'.
\end{Theorem}
\begin{remark}
This is a remark.
\end{remark}
\end{body}
\end{source}
\begin{result}
\begin{Theorem}
Note how it still retains the default style,
`plain'.
\end{Theorem}
\begin{remark}
This is a remark.
\end{remark}
\end{result}
\newpage
Thmtools also supports the \pkg{shadethm} and \pkg{thmbox} packages:
\begin{source}
\begin{preamble}[gobble=4]
\usepackage{amsthm}
\usepackage{thmtools}
\usepackage[dvipsnames]{xcolor}
\declaretheorem[shaded={bgcolor=Lavender,
textwidth=12em}]{BoxI}
\declaretheorem[shaded={rulecolor=Lavender,
rulewidth=2pt, bgcolor={rgb}{1,1,1}}]{BoxII}
\end{preamble}
\begin{body}[gobble=4]
\begin{BoxI}[Euclid]
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{BoxI}
\begin{BoxII}[Euclid]
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{BoxII}
\end{body}
\end{source}
\begin{result}
\begin{BoxI}
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{BoxI}
\begin{BoxII}
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{BoxII}
\end{result}
As you can see, the color parameters can take two forms: it's either the
name of a color that is already defined, without curly braces, or it can
start with a curly brace, in which case it is assumed that
|\definecolor{colorname}|$\langle$\textsl{what you said}$\rangle$ will be
valid \LaTeX\ code. In our case, we use the |rgb| model to manually specify
white. (|shadethm|'s default background color is {\fboxsep=0pt \fcolorbox{black}[gray]{0.92}{\phantom{XX}}} |[gray]{0.92}|)
For the \pkg{thmbox} package, use the |thmbox| key:
\begin{source}
\begin{preamble}[gobble=4]
\usepackage{amsthm}
\usepackage{thmtools}
\declaretheorem[thmbox=L]{boxtheorem L}
\declaretheorem[thmbox=M]{boxtheorem M}
\declaretheorem[thmbox=S]{boxtheorem S}
\end{preamble}
\begin{body}[gobble=4]
\begin{boxtheorem L}[Euclid]
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{boxtheorem L}
\begin{boxtheorem M}[Euclid]
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{boxtheorem M}
\begin{boxtheorem S}[Euclid]
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{boxtheorem S}
\end{body}
\end{source}
\begin{result}
\begin{boxtheorem L}[Euclid]
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{boxtheorem L}
\begin{boxtheorem M}[Euclid]
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{boxtheorem M}
\begin{boxtheorem S}[Euclid]
For every prime $p$, there is a prime $p'>p$.
In particular, there are infinitely many primes.
\end{boxtheorem S}
\end{result}
Note that for both |thmbox| and |shaded| keys, it's quite possible they will not
cooperate with a style key you give at the same time.
\newpage
\subsection{Declaring new theoremstyles}
\Thmtools\ also offers a new command to define new theoremstyles. It is
partly a frontend to the |\newtheoremstyle| command of \pkg{amsthm} or
\pkg{ntheorem}, but it offers (more or less successfully) the settings of both to
either. So we are talking about the same things, consider the sketch in
\autoref{fig:params}. To get a result like that, you would use something
like
\begin{source}
\begin{preamble}[gobble=4]
\declaretheoremstyle[
spaceabove=6pt, spacebelow=6pt,
headfont=\normalfont\bfseries,
notefont=\mdseries, notebraces={(}{)},
bodyfont=\normalfont,
postheadspace=1em,
qed=\qedsymbol
]{mystyle}
\declaretheorem[style=mystyle]{styledtheorem}
\end{preamble}
\begin{body}[gobble=4]
\begin{styledtheorem}[Euclid]
For every prime $p$\dots
\end{styledtheorem}
\end{body}
\end{source}
\begin{result}
\begin{styledtheorem}[Euclid]
For every prime $p$\dots
\end{styledtheorem}
\end{result}
Again, the defaults are reasonable and you don't
have to give values for everything.
There is one important thing you cannot see in this example: there are
more keys you can pass to |\declaretheoremstyle|: if \thmtools\ cannot
figure out at all what to do with it, it will pass it on to the
|\declaretheorem| commands that use that style. For example, you may use
the |boxed| and |shaded| keys here.
To change the order in which title, number and note appear, there is a key
|headformat|. Currently, the values ``margin'' and ``swapnumber'' are
supported. The daring may also try to give a macro here that uses the
commands |\NUMBER|, |\NAME| and |\NOTE|.
You cannot circumvent the fact
that |headpunct| comes at the end, though, nor the fonts and braces you
select with the other keys.
\begin{figure}
\centering
\fbox{%
\begin{tikzpicture}[
remember picture,
>=latex,
nodes={
font=\normalfont\sffamily\itshape\small,
RoyalBlue
},
every subnode/.style={
inner sep=0pt
},
tip/.style={|<->|}
]
\node[black, font=\Large, text width=.618\textwidth, align=justify]
{%
which resulted in the following insight: \\
\subnode{space above}{\rule{0pt}{1.3\baselineskip}} \\
\subnode{head indent}{\strut\hspace*{4em}}
\textbf{%
\subnode{head}{Theorem} 1.2
\subnode{note brace}{(}%
\subnode{note}{\textit{Euclid}})%
\subnode{head punct}{.} %
}
\subnode{post head space}{\strut\hspace*{4.5em}}
For every prime~$p$, there is a prime~$p'>p$. In particular, the list
of primes, $2,3,5,7,\dots$, is infinite. \hfill
\subnode{qed}{$\Box$} \\
\subnode{space below}{\rule{0pt}{1.3\baselineskip}} \\
As a consequence, lorem ipsum dolor sit amet frob-%nicate foo
% paret.
};
\draw[tip] (space above.south west) -- node[right] {spaceabove} (space above.north west);
\draw[tip] (head indent.west) -- node[above] {headindent} (head indent.east);
\draw (head.center) -- +(0, 10pt) node[above] {headfont};
\draw (note brace.north) -- +(0, 20pt) node[above] {notebraces};
\draw (note.center) -- +(0, 10pt) node[above] {notefont};
\draw (head punct.base east) -- +(0, 28pt) node[above] {headpunct};
\draw[tip] (post head space.west) -- node[above] {postheadspace} (post head space.east);
\node at ([xshift=-12pt]qed.150) {qed};
\draw[tip] (space below.south west) -- node[right] {spacebelow} (space below.north west);
\end{tikzpicture}%
}
\caption{Settable parameters of a theorem style.}
\label{fig:params}
\end{figure}
\newpage
\section{Repeating theorems}
Sometimes, you want to repeat a theorem you have given in full earlier,
for example you either want to state your strong result in the
introduction and then again in the full text, or you want to re-state a
lemma in the appendix where you prove it. For example, I lied about
\autoref{thm:euclid} on p.\,\pageref{thm:euclid}: the true code used was
\begin{source}
\begin{preamble}[gobble=6]
\usepackage{thmtools, thm-restate}
\declaretheorem{theorem}
\end{preamble}
\begin{body}[gobble=6]
\begin{restatable}[Euclid]{theorem}{firsteuclid}
\label{thm:euclid}%
For every prime $p$, there is a prime $p'>p$.
In particular, the list of primes,
\begin{equation}\label{eq:1}
2,3,5,7,\dots
\end{equation}
is infinite.
\end{restatable}
\end{body}
and to the right, I just use
\begin{body}[gobble=6]
\firsteuclid*
\vdots
\firsteuclid*
\end{body}
\end{source}
\begin{result}
\firsteuclid*
\vdots
\firsteuclid*
\end{result}
Note that in spite of being a theorem-environment, it gets number one all
over again. Also, we get equation number~\eqref{eq:1} again. The star in
|\firsteuclid*| tells thmtools that it should redirect the label
mechanism, so that this reference: \autoref{thm:euclid} points to
p.\,\pageref{thm:euclid}, where the unstarred environment is used. (You can
also use a starred environment and an unstarred command, in which case the
behaviour is reversed.) Also, if you use \pkg{hyperref} (like you see in this manual), the links will lead you
to the unstarred occurence.
Just to demonstrate that we also handle more involved cases, I repeat
another theorem here, but this one was numbered within its section: note
we retain the section number which does not fit the current section:
\begin{source}
\begin{body}[gobble=6]
\euclidii*
\end{body}
\end{source}
\begin{result}
\euclidii*
\end{result}
\newpage
\section{Lists of theorems}
To get a list of theorems with default formatting, just use
|\listoftheorems|:
\begin{source}
\begin{body}[gobble=6]
\listoftheorems
\end{body}
\end{source}
\begin{result}
\let\chapter\section
\let\clearpage\relax
\listoftheorems
\end{result}
Not everything might be of the same importance, so you can filter out
things by environment name:
\begin{source}
\begin{body}[gobble=6]
\listoftheorems[ignoreall,
show={theorem,Theorem,euclid}]
\end{body}
\end{source}
\begin{result}
\let\chapter\section
\let\clearpage\relax
\listoftheorems[ignoreall, show={theorem,Theorem,euclid}]
\end{result}
And you can also restrict to those environments that have an optional
argument given. Note that two theorems disappear compared to the previous
example. You could also say just |onlynamed|, in which case it will
apply to \emph{all} theorem environments you have defined.
\begin{source}
\begin{body}[gobble=6]
\listoftheorems[ignoreall,
onlynamed={theorem,Theorem,euclid}]
\end{body}
\end{source}
\begin{result}
\let\chapter\section
\let\clearpage\relax
\listoftheorems[ignoreall, onlynamed={theorem,Theorem,euclid}]
\end{result}
As might be expected, the heading given is defined in |\listtheoremname|.
%And finally, you can configure |\listoftheorems| in advance by |\setlisttheoremstyle{keys}|.
\section{Extended arguments to theorem environments}
Usually, the optional argument of a theorem serves just to give a note
that is shown in the theorem's head. \Thmtools\ allows you to have a
key-value list here as well. The following keys are known right now:
\begin{description}
\item[name] This is what used to be the old argument. It usually holds
the name of the theorem, or a source. This key also accepts an
\emph{optional} argument, which will go into the list of theorems. Be
aware that since we already are within an optional argument, you have to
use an extra level of curly braces:
|\begin{theorem}[name={[Short name]A long name,...]}|
\item[label] This will issue a |\label| command after the head. Not very
useful, more of a demo.
\item[continues] Saying |continues=foo| will cause the number that is
given to be changed to |\ref{foo}|, and a text is added to the note.
(The exact text is given by the macro |\thmcontinues|, which takes the
label as its argument.)
\item[restate] Saying |restate=foo| will hopefully work like
wrapping this theorem in a restatable environment. (It probably still fails
in cases that I didn't think of.) This key also accepts an optional
argument: when restating, the restate key is replaced by this argument,
for example, |restate=[name=Boring rehash]foo| will result in a
different name. (Be aware that it is possible to give the same key
several times, but I don't promise the results. In case of the name key,
the names happen to override one another.)
\end{description}
\begin{source}
\begin{body}[gobble=6]
\begin{theorem}[name=Keyed theorem,
label=thm:key]
This is a
key-val theorem.
\end{theorem}
\begin{theorem}[continues=thm:key]
And it's spread out.
\end{theorem}
\end{body}
\end{source}
\begin{result}
\begin{theorem}[name=Keyed theorem,
label=thm:key]
This is a key-val theorem.
\end{theorem}
\begin{theorem}[continues=thm:key]
And it's spread out.
\end{theorem}
\end{result}
\chapter{\Thmtools for the extravagant}\label{cha:extravagant}
This chapter will go into detail on the slightly more technical offerings
of this bundle. In particular, it will demonstrate how to use the general
hooks provided to extend theorems in the way you want them to behave.
Again, this is done mostly by some examples.
\section{Understanding \thmtools' extension mechanism}
\Thmtools\ draws most of its power really only from one feature:
the |\newtheorem| of the backend will, for example, create
a theorem environment, i.e. the commands |\theorem| and
|\endtheorem|. To add functionality, four places immediately
suggest themselves: ``immediately before'' and ``immediately after'' those
two.
There are two equivalent ways of adding code there: one is to call
|\addtotheorempreheadhook| and its brothers and sisters
|...postheadhook|, |...prefoothook|
and |...postfoothook|.
All of these take an \emph{optional} argument, the name of the
environment, and the new code as a mandatory argument. The name of environment is
optional because there is also a set of ``generic'' hooks added to every
theorem that you define.
The other way is to use the keys |preheadhook| et al. in your
|\declaretheorem|. (There is no way of accessing the generic
hook in this way.)
The hooks are arranged in the following way: first the specific prehead,
then the generic one. Then, the original |\theorem| (or
whatever) will be called. Afterwards, first the specific posthead again,
then the generic one. (This means that you cannot wrap the head alone in
an environment this way.) At the end of the theorem, it is the other way
around: first the generic, then the specific, both before and after that
|\endtheorem|. This means you can wrap the entire theorem
easily by adding to the prehead and the postfoot hooks. Note that
\thmtools\ does not look inside |\theorem|, so you cannot get
inside the head formatting, spacing, punctuation in this way.
In many situations, adding static code will not be enough. Your code can
look at |\thmt@envname|, |\thmt@thmname| and
|\thmt@optarg|, which will contain the name of the environment,
its title, and, if present, the optional argument (otherwise, it is
|\@empty|).
\emph{However}, you should not make assumptions about the optional
argument in the preheadhook: it might still be key-value, or it might
already be what will be placed as a note. (This is because the key-val
handling itself is added as part of the headkeys.)
\section{Case in point: the \texttt{shaded} key}
Let us look at a reasonably simple example: the |shaded| key, which we've
already seen in the first section. You'll observe that we run into a
problem similar to the four-hook mess: your code may either want to modify
parameters that need to be set beforehand, or it wants to modify the
environment after it has been created. To hide this from the user, the
code you define for the key is actually executed twice, and
|\thmt@trytwice{A}{B}| will execute A on the first pass, and B
on the second. Here, we want to add to the hooks, and the hooks are only
there in the second pass.
\DocInput{thmdef-shaded.dtx}
\section{Case in point: the \texttt{thmbox} key}
\DocInput{thmdef-thmbox.dtx}
\section{Case in point: the \texttt{mdframed} key}
\DocInput{thmdef-mdframed.dtx}
\section{How \thmtools\ finds your extensions}
Up to now, we have discussed how to write the code that adds functionality
to your theorems, but you don't know how to activate it yet.
Of course, you can put it in your preamble, likely embraced by
|\makeatletter| and |\makeatother|, because you are
using internal macros with @ in their name (viz.,
|\thmt@envname| and friends). You can also put them into a
package (then, without the |\makeat...|),
which is simply a file ending in |.sty| put somewhere that \LaTeX\ can find
it, which can then be loaded with |\usepackage|.
To find out where exactly that is, and if you'd need to update
administrative helper files such as a filename database FNDB,
please consult the documentation of your \TeX\ distribution.
Since you most likely want to add keys as well, there is a shortcut that
\thmtools\ offers you: whenever you use a key |key| in a
|\declaretheorem| command, and \thmtools\ doesn't already know
what to do with it, it will try to |\usepackage{thmdef-key}| and
evaluate the key again. (If that doesn't work, \thmtools\ will cry
bitterly.)
For example, there is no provision in \thmtools\ itself that make the
|shaded| and |thmbox| keys described above special:
in fact, if you want to use a different package to create frames, you just
put a different |thmdef-shaded.sty| into a preferred texmf tree.
Of course, if your new package doesn't offer the old keys, your old
documents might break!
The behaviour for the keys in the style definition is slightly different:
if a key is not known there, it will be used as a ``default key'' to every
theorem that is defined using this style. For example, you can give the
|shaded| key in a style definition.
Lastly, the key-val arguments to the theorem environments themselves need
to be loaded manually, not least because inside the document it's too late
to call |\usepackage|.
\chapter{\Thmtools for the completionist}\label{cha:reference}
This will eventually contain a reference to all known keys, commands, etc.
\section{Known keys to \texttt{\textbackslash declaretheoremstyle}}
\def\keydefaultcontext{declaretheoremstyle}
N.b. implementation for \pkg{amsthm} and \pkg{ntheorem} is separate for
these, so if it doesn't work for \pkg{ntheorem}, try if it works with
\pkg{amsthm}, which in general supports more things.
Also, all keys listed as known to |\declaretheorem| are valid.
\key{spaceabove} Value: a length. Vertical space above the theorem,
possibly discarded if the theorem is at the top of the page.
\key{spacebelow} Value: a length. Vertical space after the theorem,
possibly discarded if the theorem is at the top of the page.
\key{headfont} Value: \TeX\ code. Executed just before the head of the
theorem is typeset, inside a group. Intended use it to put font switches here.
\key{notefont}
Value: \TeX\ code. Executed just before the note in the head is typeset, inside a group.
Intended use it to put font switches here. Formatting also applies to
the braces around the note.
Not supported by \pkg{ntheorem}.
\key{bodyfont}
Value: \TeX\ code. Executed before the begin part of the theorem ends,
but before all afterheadhooks. Intended use it to put font switches here.
\key{headpunct}
Value: \TeX\ code, usually a single character. Put at the end of the
theorem's head, prior to linebreaks or indents.
\key{notebraces}
Value: Two characters, the opening and closing symbol to use around a
theorem's note.
(Not supported by \pkg{ntheorem}.)
\key{postheadspace}
Value: a length. Horizontal space inserted after the entire head of the
theorem, before the body. Does probably not apply (or make sense) for
styles that have a linebreak after the head.
\key{headformat}
Value: \LaTeX\ code using the special placeholders |\NUMBER|, |\NAME|
and |\NOTE|, which correspond to the (formatted, including the braces
for |\NOTE| etc.) three parts of a theorem's head. This can be used to
override the usual style ``1.1 Theorem (Foo)'', for example to let the
numbers protude in the margin or put them after the name.
Additionally, a number of keywords are allowed here instead of \LaTeX\
code:
\begin{description}
\item[margin] Lets the number protrude in the (left) margin.
\item[swapnumber] Puts the number before the name. Currently
not working so well for unnumbered theorems.
\item[] \emph{This list is likely to grow}
\end{description}
\key{headindent}
Value: a length. Horizontal space inserted before the head. Some
publishers like |\parindent| here for remarks, for example.
\section{Known keys to \texttt{\textbackslash declaretheorem}}
\def\keydefaultcontext{declaretheorem}
\key{parent}
Value: a counter name. The theorem will be reset whenever that counter
is incremented. Usually, this will be a sectioning level, |chapter| or
|section|.
\key{numberwithin}
(Same as |parent|.)
\key{within}
(Same as |parent|.)
\key{sibling}
Value: a counter name. The theorem will use this counter for numbering.
Usually, this is the name of another theorem environment.
\key{numberlike}
(Same as |sibling|.)
\key{sharenumber}
(Same as |sibling|.)
\key{title}
Value: \TeX\ code. The title of the theorem. Default is the name of the
environment, with |\MakeUppercase| prepended. You'll have to give
this if your title starts with an accented character, for example.
\key{name}
(Same as |title|.)
\key{heading}
(Same as |title|.)
\key{numbered}
Value: one of the keywords |yes|, |no| or |unless unique|. The theorem
will be numbered, not numbered, or only numbered if it occurs more than
once in the document. (The latter requires another \LaTeX\ run and works well combined with |sibling|.)
\key{style}
Value: the name of a style defined with |\declaretheoremstyle| or
|\newtheoremstyle|. The theorem will use the settings of this style.
\key{preheadhook}
Value: \LaTeX\ code. This code will be executed at the beginning of the
environment, even before vertical spacing is added and the head is
typeset. However, it is already within the group defined by the
environment.
\key{postheadhook}
Value: \LaTeX\ code. This code will be executed after the call to the
original begin-theorem code. Note that all backends seem to delay
typesetting the actual head, so code here should probably enter
horizontal mode to be sure it is after the head, but this will change
the spacing/wrapping behaviour if your body starts with another list.
\key{prefoothook}
Value: \LaTeX\ code. This code will be executed at the end of the body
of the environment.
\key{postfoothook}
Value: \LaTeX\ code. This code will be executed at the end of the
environment, even after eventual vertical spacing, but still within the
group defined by the environment.
\key{refname}
Value: one string, or two strings separated by a comma (no spaces). This
is the name of the theorem as used by |\autoref|, |\cref| and friends. If it is
two strings, the second is the plural form used by |\cref|. Default
value is the value of |name|, i.e. usually the environment name, with
|\MakeUppercase| prepended.
\key{Refname}
Value: one string, or two strings separated by a comma (no spaces). This
is the name of the theorem as used by |\Autoref|, |\Cref| and friends. If it is
two strings, the second is the plural form used by |\Cref|. This can be
used for alternate spellings, for example if your style requests no
abbreviations at the beginning of a sentence. No default.
\key{shaded}
Value: a key-value list, where the following keys are possible:
\begin{description}
\item[textwidth]
The linewidth within the theorem.
\item[bgcolor]
The color of the background of the theorem. Either a color name or a
color spec as accepted by |\definecolor|, such as |{gray}{0.5}|.
\item[rulecolor]
The color of the box surrounding the theorem. Either a color name or
a color spec.
\item[rulewidth]
The width of the box surrounding the theorem.
\item[margin]
The length by which the shade box surrounds the text.
\end{description}
\key{thmbox}
Value: one of the characters |L|, |M| and |S|; see examples in \autoref{sec:styling}.
\section{Known keys to in-document theorems}
\def\keydefaultcontext{theorem}
\key{label} Value: a legal |\label| name.
Issues a |\label| command after the theorem's head.
\key{name} Value: \TeX\ code that will be typeset.
What you would have put in the optional argument in the
non-keyval style, i.e. the note to the head. This is \emph{not} the same
as the |name| key to |\declaretheorem|, you cannot override that from within
the document.
\key{listhack} Value: doesn't matter. (But put something to trigger
key-val behaviour, maybe |listhack=true|.) Linebreak styles in \pkg{amsthm}
don't linebreak if they start with another list, like an |enumerate|
environment. Giving the |listhack| key fixes that. \emph{Don't} give this
key for non-break styles, you'll get too little vertical space! (Just use
|\leavevmode| manually there.)
An all-around |listhack| that handles both situations might come in a
cleaner rewrite of the style system.
\section{Known keys to \texttt{\textbackslash listoftheorems}}
\def\keydefaultcontext{listof}
\key{title} Value: title of |\listoftheorems|. Initially |List of Theorems|.
\key{ignore} Value: list of theorem environment names. Filter out things by environment names. Default value is list of all defined theorem environments.
\key{ignoreall} Ignore every theorem environment. This key is usually followed by keys |show| and |onlynamed|.
\key{show} Value: list of theorem environments. Leave theorems that belong to specified list and filter out others. Default value is list of all defined theorem environments.
\key{showall} The opposite effect of |ignoreall|.
\key{onlynamed} Value: list of theorem environments. Leave things that are given an optional argument and belong to specified list, and filter out others. Default value is list of all defined theorem environments.
\key{swapnumber} Value: |true| or |false|. Initially |false| and default value is |true|. No default.
\begin{source}
\begin{body}[gobble=6]
\listoftheorems[ignoreall, onlynamed={lemma}]
\listoftheorems[ignoreall, onlynamed={lemma},
swapnumber
]
\end{body}
\end{source}
\begin{result}
\let\chapter\section
\let\clearpage\relax
\listoftheorems[ignoreall, onlynamed={lemma}]
\vspace{-1ex}
\listoftheorems[ignoreall, onlynamed={lemma}, swapnumber]
\end{result}
\key{numwidth} Value: a length. If |swapnumber=false|, the theorem number is typeset in a box of of width |numwidth|. Initially |1.5pc| for AMS classes and |2.3em| for others.
\section{Restatable -- hints and caveats}
TBD.
\begin{itemize}
\item Some counters are saved so that the same values appear when you
re-use them. The list of these counters is stored in the macro
|\thmt@innercounters| as a comma-separated list without spaces; default: |equation|.
\item To preserve the influence of other counters (think: equation
numbered per section and recall the theorem in another section), we need
to know all macros that are used to turn a counter into printed output.
Again, comma-separated list without spaces, without leading backslash, stored as
|\thmt@counterformatters|. Default:
|@alph,@Alph,@arabic,@roman,@Roman,@fnsymbol|.
All these only take
the \LaTeX\ counter |\c@foo| as arguments. If you bypass this and use
|\romannumeral|, your numbers go wrong and you get what you deserve.
Important if you have very strange numbering, maybe using greek letters
or somesuch.
\item I think you cannot have one stored counter within another one's
typeset representation. I don't think that ever occurs in reasonable
circumstances, either. Only one I could think of: multiple subequation
blocks that partially overlap the theorem. Dude, that doesn't even nest.
You get what you deserve.
\item |\label| and \pkg{amsmath}'s |\ltx@label| are disabled inside the
starred execution. Possibly, |\phantomsection| should be disabled as
well?
\end{itemize}
\appendix
\chapter{\Thmtools for the morbidly curious}\label{cha:sourcecode}
This chapter consists of the implementation of \thmtools, in case you
wonder how this or that feature was implemented. Read on if you want a
look under the bonnet, but you enter at your own risk, and bring an oily
rag with you.
\section{Core functionality}
\subsection{The main package}
\DocInput{thmtools.dtx}
\subsection{Adding hooks to the relevant commands}
\DocInput{thm-patch.dtx}
\subsection{The key-value interfaces}
\DocInput{thm-kv.dtx}
\subsection{Lists of theorems}
\DocInput{thm-listof.dtx}
\subsection{Re-using environments}
\DocInput{thm-restate.dtx}
\subsection{Fixing \texttt{autoref} and friends}
\DocInput{thm-autoref.dtx}
\section{Glue code for different backends}
\subsection{\texttt{amsthm}}
\DocInput{thm-amsthm.dtx}
\subsection{\texttt{beamer}}
\DocInput{thm-beamer.dtx}
\subsection{\texttt{ntheorem}}
\DocInput{thm-ntheorem.dtx}
\section{Generic tools}
\subsection{A generalized argument parser}
\DocInput{parseargs.dtx}
\subsection{Different counters sharing the same register}
\DocInput{aliasctr.dtx}
\subsection{Tracking occurrences: none, one or many}
\DocInput{unique.dtx}
\end{document}